|
Material |
Description |
Uses |
|
Sisal |
Harsh Material for
high cutting applications |
Used for rapid stock
removal on ferrous metals. Can be treated with impregnations
to give properties as per the treatment
table. |
|
Coloured Cotton |
Made from mixed cloured cotton material. ½" (13 mm)
thick sections with spiral stitching. Stitching can be open (widely)
spaced, close or very close. Supplied singly or in multiples
of these sections with fibre or leather washers for use on taper
spindles. |
General purpose buff
with good cutting action for use on non- ferrous metals. |
|
White Stitched Cotton |
Made from soft mixed cotton material, ½" (13 mm)
thick sections with spiral stitching. Stitching can be open (widely)
spaced, close or very close. Supplied singly or in multiples
of these sections with fibre or leather washers for use on taper
spindles. |
General purpose buff with
good cutting action for use on most metals, especially non-ferrous. |
|
Bronco Quality |
Heavy cutting mill starched
calico material |
For use on ferrous and ‘yellow’
metals. Also used with Lea Greaseless products to provide a high
level of stock removal. |
|
Aurelia/Zeta Quality |
Medium
cutting white calico material. |
Medium, general purpose
buff for use on brass, copper, steel, nickel-silver, aluminium,
chrome or plastics. |
|
DG
Quality
|
Medium/Fine
white calico material. |
Medium soft buff for
finishing brass, silver, copper, steel, nickel-silver,aluminium,
chrome and plastics. Also used with Lea Greasless products. |
|
Delta/LG
Quality
|
Fine white
calico. |
Soft
cotton for a very fine finish on brass, silver, copper, steel,
nickel-silver,aluminium, chrome and plastics. |
|
Luxol/Optal
Quality
|
Made from whole discs
of very soft cotton in a variety of thicknesses. The cloth can
be "raised" or carded on one or both sides for extra
softness. |
Ultrafine finishing
on soft metals such as gold, silver, silver-plate or brass. |
|
Our
buff manufacturing division, Merridale-Laycock, source many grades
of cloth and are able to manufacture to customers specifications
if required.
|
